Looking for the best circular saw for you? Keep reading to find the best saw for you and your budget.

Disclaimer: We Love Power Tools is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.

The Best Circular Saws For DIY – Top 6

What’s the best circular saw for your needs and budget? To find out, we reviewed over 50 saws and compared the top saws. We found the best six circular saws. And of the six, three really stood out.

The tools below are the best circular saws in the budget, mid-range and high-end price ranges.

Budget sawsMid-range sawsHigh-end saws
Hitachi C7SB2Porter-Cable PC15TCSPorter-Cable PC15TCSMSKIL 5280-01DEWALT DWE575SBMakita 5007MGA
Amps/volts15 amps15 amps15 amps15 amps15 amps15 amps
Blade size7 1/4 inches7 1/4 inches7 1/4 inches7 1/4 inches7 1/4 inches7 1/4 inches
Electric brakeNoNoNoNoYesYes
Bevel angle0-55 degrees0-45 degrees0-55 degrees0-51 degrees0-57 degrees0-56 degrees
Editors pickBest budget sawBest mid-range sawBest high-end saw
Read MoreRead MoreRead MoreRead MoreRead MoreRead More
Check priceCheck priceCheck priceCheck priceCheck priceCheck price


Which is the best circular saw for you?

The best budget saw, if you’re on a budget, is the Hitachi C7SB2. It’s light for it’s price and capable of many tasks without breaking the bank.

When it comes to mid-range saws, the Porter-Cable PC15TCSM is the best circular saw. It can handle almost every circular saw project without costing a much as a professional saw.

For high-end saws, the DEWALT DWE575SB is the best circular saw that money can buy. It can do anything you can imagine with a circular saw, has excellent build quality and a great warranty.

You might notice that we are only recommending saws with a power cord. In our opinion, battery powered circular saws are fine for small projects. But if you need to work all day on a project, you’re gonna need the constant power that only a power cord can provide.

What to look for when buying a circular saw

There are 4 things to look for when buying the best circular saw for you.

  • Amps/volts – The power of a saw is measured in amps for corded drills and volts for cordless drills. And the more power a saw has, the more it is capable of cutting.
  • Blade size – Saws with bigger blades can cut at deeper depths. For example, a 7-1/4 inch blade can cut though 2 inch lumber at 45 degrees in a single pass. Whereas a 5-3/8-inch saw can cut through 2 inch lumber but requires two passes at 45 degrees.So bigger blades are usually better, however, smaller blades weigh less and are easier to control so you should consider the trade-offs. (If you need help picking the right blade, check out our blade reviews.
  • Electric brakes – Electric brakes slow down the blade by reversing the flow of electricity in the saw motor when you release the trigger. This is an important safety feature that keeps you safe by stopping the blade from spinning as soon as possible.
  • Bevel angle – A beveled cut is any cut you make that is less that 90 degrees. The bigger the bevel angle that a circular saw has, the wider range of cuts it can make.


Best budget circular saw – Hitachi C7SB2

The Hitachi C7SB2 is a budget circular saw that packs a punch without hurting your wallet.

It comes with a 15 amp sidewinder motor that has more than enough power for it’s 7 1/4 inch blade. And it will blow through most framing lumber, plywood and even oak without a problem.

It has a maximum bevel angle of 55 degrees, which allow you to make a wide variety of cuts. That beats out it’s closest competitor, the Porter-Cable PC15TCS, whose maximum bevel angle is 45 degrees. The C7SB2 has bevel stops of 0, 45 and 55 degrees to allow you to quickly change the the blade angle between the most commonly used settings. The bevel lock uses a lever, instead of a wingnut, and that makes sure that the lock stays firmly in place while you are cutting.

The shoe of the saw is made from aluminium alloy, which helps to keep the saw light without costing the same as magnesium. In fact it’s over a pound lighter than the Porter-Cable PC15TCS.

The saw cannot have its depth adjusted but despite this you can make a wide variety of cuts with the C7SB2. This is helped by the fact that the cut line marks and scales on both sides are accurate and highly visible; and the saw does a good job of blowing the sawdust away from the cutline.

The blade lock is easy to use and included is a cast and machined blade bolt wrench is a lot nicer than the little stamped sheet metal wrench you find with most saws.

The saw lacks a laser but you really shouldn’t expect that on a budget saw. If you need a guide, clamp a guide piece level to your work and you will be cutting true in no time.

The motor brushes are easily replaceable, which should only happen if you are a heavy user.

As you’d expect with a Hitachi, there’s a great warranty – 5 years, which even the high-end brands can’t beat.

In all, this is a great saw that can handle most tasks without breaking the bank.

Who should buy this circular saw? A DIYer who wants the best circular saw you can buy on a budget.
Check price on Amazon

Budget runner-up circular saw – Porter-Cable PC15TCS

The Porter-Cable PC15TCS was beaten out as our budget circular saw based only it’s weight, maximum bevel angle and warranty.

However, it was a very close call because this is a great saw.

Like the Hitachi, it has a 15 amp sidewinder motor turning a 7 1/4 inch blade. The PC15TCS is slightly slower at 5,6000 RPM versus the Hitachis 5,800 RPM. But in the big scheme of things, that an insignificant difference.

The PC15TCS has a shoe made from steel. This adds a little weight compared to the Hitachi’s aluminium alloy shoe, but that extra weight brings extra strength so you don’t have to worry about it breaking.

The Porter-Cable has a maximum bevel angle of 45 degrees and doesn’t have a bevel locks. This doesn’t compare favourably to the Hitachi, but if you aren’t planning on using those features that’s not much of a loss. The bevel lock lever is made from steel which is much more durable than plastic levers which you see on some budget saws.

The saw comes with a spindle lock which makes changing the blade easy. And the spindle wrench stores away on the shoe, which is really convenient when it comes time to change the blade.

Because of the saws excellent balance, you can expect to be make accurate cuts without too much effort. Especially as the motor is powerful enough to cut 2 X without bogging down.

Overall, this is a great saw that will would be a great buy for a DIYer who needs to make simple cuts.

Who should buy this circular saw? A DIYer who thinks that the best circular saw is one that’s simple, good quality and cheap.
Check price on Amazon

Best mid-range circular saw – Porter-Cable PC15TCSM

If you’re looking for a mid-range saw – not too cheap and not too expensive – the Porter Cable PC15TCSM is the saw for you.

It comes with the industry standard 15 amp sidewinder motor that turns a 7 1/4 inch blade. It’s closest rival, the SKIL 5280-01, has the same setup. However, the Porter-Cable wins out in the motor stakes by having a higher RPM – 5,600 RPM vs 5,300 RPM.

Speaking of power, the PC15TCSM comes with a 10 foot power cord, keeps the saw from binding up on the end of a full sheet as you approach the other end. So instead of having to stop and move your power cord, you can keep cutting.Thats a nice little innovation that will help keep you productive.

The PC15TCSM does not come with a laser, which is something that the SKIL 5280-01 does have. However, Porter-Cable designed the saw so that it blows the sawdust out of you cutting line. This is a nice feature that will help you to make accurate cuts.

Porter-Cable also included a number of other features to help you make accurate cuts over and over. First, there’s the maximum bevel angle. This allows you to make angled cuts up to 55 degrees, whereas the SKIL only allows up to 51 degrees.

Second, the PC15TCSM has 3 bevel stops at 0, 22.5 and 45 degrees. These allow you to quickly change the angle of the saw to the most popular settings and then quickly get back to cutting.

Third, you can adjust the depth of the PC15TCSM, which increases the variety of cuts that you can make.

Porter-Cable also made sure that the bevel and depth lever locks are easy to use by giving them big ends that are easy to hold onto.

Another feature which will help you make accurate cuts is the shoes. It’s made from magnesium, which is harder than steel. That means the shoe won’t get knocked out of alignment from the bangs and scrapes that always seem to occur during a project.

The design of the saw makes it comfortable and easy to use, even if it weighs a little more than it’s competitors. And you don’t get an electric brake on the PC15TCSM, but you should really only expect to see that feature on a high-end saw. So for us that wasn’t a big problem.

Another time saving feature is the spindle lock. This keeps the blade in place when you are trying to change it, rather than letting it move freely. If you’ve ever had to wrestle with a spindle nut that won’t stay in place, you know how useful this feature can be.

Overall, this is a well designed saw that is capable of most cuts. In fact Porter-Cable is so confident in this saw that it comes with a 3 year warranty.

Throw in the fact that you get also get a well-designed case that can hold spare blades and a rip fence and you have a mid-range winner.

Who should buy this circular saw? Someone looking for a capable saw that doesn’t break the bank.
Check price on Amazon

Mid-range runner-Up circular saw – SKIL 5280-01

The SKIL 5280-01 is a capable mid-range saw that’s a serious rival for the Porter-Cable PC15TCSM.

In fact, in some areas it beats the PC15TCSM. For a start, it can cut deeper at both 45 and 90 degrees. That’s going to let you tackle thicker pieces of wood without having to flip it to cut it twice.

And the 5280-01 is lighter at 8.7 pounds versus 9.5 pounds. However, that weight saving probably comes from the shoe, which is made from steel sheet rather than being molded from magnesium.

The SKIL comes with a 15 amp sidewinder motor that spins just a little slower than the Porter-Cable at 5,300 RPM. But it still has plenty of power for ordinary uses like cutting 2x4s, 1.5″ planks and plywood.

Like the PC15TCSM, the SKIL includes nice time-saving features like a spindle lock and bevel stops. Unfortunately though, it only has one bevel stop of 45 degrees whereas the PC15TCSM had another at 22.5 degrees.


The 5280-01 includes a laser, which while not necessary is surprisingly useful once you start using it. The same goes for the integrated dust blower.

The cloth bag seems sturdy and durable. And the saw fits in a smaller space than similarly sized saws in the hard plastic cases, so you’ll save some space. The carrying/storage bag also includes an extra pocket where you can store other small items you might need.

So overall, this is a great saw for it’s price. So why is it the runner-up to the Porter-Cable as the best circular saw in the mid-range category? Well it’s a very close call. But the PC15TCSM has a few features, like bevel stops and a long cord, that just make it a little easier to use.

If you can live without those differences, the SKIL might be the saw for you. (Read our full-length review to learn more about the 5280-1)

Who should buy this circular saw? Buy this saw if you are looking for a mid-range saw that’s light and cuts just about as deep as anything else.
Check price on Amazon

Best Circular Saw – DEWALT DWE575SB

The DEWALT DWE575SB is a powerful, light, saw that will make every cut that is possible with a circular saw.

It’s 15 amp sidewinder motor is capable of 5,100 RPM and can cut through most woods including oak and walnut. So whatever your project, this saw can handle it. You can even put a diamond blade on it and cut patio blocks!

The power of the saw is tempered by a soft-start mechanism that slowly ramps up the power, instead of suddenly spinning at full speed. Thats a nice safety feature that can help prevent the saw from jerking in your hand or causing you to drop it.

The big advantage of this saw is it’s weight. It’s 1.3 pounds lighter than the Makita 5007MGA, which is its closest rival. If you pick up the two saws, you definitely notice that the DEWALT is lighter. And by the end of a long day on a jobsite, your arms will be thankful that you picked the DWE575SB.

A nice safety feature of this saw is it’s electric brake. When you let go of the trigger on most circular saws, the blade slowly stops spinning. If you remember that the blade is spinning and are careful with it, you won’t have any problems. But sometimes people forget and accidents happen.
The DWE575SB solves that problem by using a electric brake. As soon as you let go of the trigger, the brake engages and stops the blade spinning in a few seconds instead of 10-12 seconds as with most saws. Hopefully, you never need this feature but it’s nice to know that it’s there, keeping you safe, if you do.

As you’d expect from a high-end saw, the DEWALT can make a wide range of cuts. It has a maximum bevel angle of 57 degrees and a maximum cutting depth of 2.55 inches. Both of these stats are just a little better than the Makita, which is one of the reasons why we rated it higher.

The saw comes with bevel stops at 0, 22.5 and 45 degrees which is going to help you stay productive when using the most common cutting angles. The same goes for the extra long power cord which lets you keep cutting without having to stop and rearrange the cord midway thorugh a cut.

The saw does not come with a rip fence but cuts very accurately even without that or a laser.

The bag that comes with the saw is much nicer than you’d expect given that it’s an afterthought for most power tool companies. It’s made from canvas and has a canvas wrapped hard metal rim around the entire top that hinges open and closed – a lot like an old doctor’s medicine bag. The bottom has long rubber feet to reduce wear and tear and it has 3 pockets on the outside.

The DEWALT DWE575SB comes with a 3 year warranty, which is 3 times longer than the Makita’s warranty. Honestly though, given the quality of DEWALT products, I’d be surprised if you ever use the warranty.

Overall, this is a very capable saw for a DIYer who tackles challenging projects and needs the best circular saw.

Who should buy this circular saw? Buy this saw if you want the best circular saw on the market today.
Check price on Amazon

High-end runner-up circular saw – Makita 5007MGA

The Makita 5007MGA is a beautiful looking saw that would have been our recommendation for best circular saw if it wasn’t for the Dewalt.

It’s powerful 15 amp motor and 7 1/4 inch blade can cut through most woods with ease, including dimensional lumber and dense engineered lumber, including LVL, PSL and I-Joists, headers, and microlams; as well as ripping panels such as plywood, OSB, particle board, and dense structural panels. In short, it can tackle pretty much anything.

So why isn’t it our high-end winner. Well it’s kinda heavy at 10.1 pounds which can be a big deal if you’re working with it all day. If that’s not an issue for you, keep reading.

The other reason that the DEWALT won out is that it can cut a little deeper but the difference is really minimal – like 2.5 inches versus 2.55 inches. So there’s very little in it to be honest.

Like the DEWALT, the 5007MGA has an electric brake that will help keep you safe once you release the trigger.and the built-in LED lights help to illuminate your work. These lights illuminate the line of cut for increased accuracy and safety. They shine on the spot where the blade meets the wood. So if the saw is plugged in, the lights are on warning you that the saw has power.

The 5007MGA has bevel stops at 0, 22.5 and 45 degrees so making those common angles cuts is quick and easy. And all the levers on the Makita have nice rubber grips on them meaning that you won’t be fumbling around trying to adjust them.

Makita also really engineered ergonomics and ease-of-use into the saw. That includes clearly visible depth and bevel markings and ergonomic hand grips to improve overall control while minimizing your fatigue.

The show is cast from magnesium and has a nice thick lip on the blade side. This helps to keep the saw in place and increases the chances of you making an accurate cut.

This is a powerful saw that really is professional grade. And the only reason that is isn’t our recommendation for best circular saw is that it weighs more than the Dewalt. If that doesn’t matter to you and you’re looking for a professional grade tool, the Makita is the best circular saw for you.

Who should buy this circular saw? Someone that needs a professional grade saw and doesn’t care how much it weighs.
Update: we loved this saw so much that we included it in our guide to the 50 best gifts for DIY fans.
Check price on Amazon

Compare The Best Circular Saws for DIY – 2017

Amps/volts15 amps15 amps15 amps15 amps15 amps15 amps
Motor designSidewinderSidewinderSidewinderSidewinderSidewinderSidewinder
Blade size7 1/4 inches7 1/4 inches7 1/4 inches7 1/4 inches7 1/4 inches7 1/4 inches
Electric brakeNoNoNoNoYesYee
Bevel angle0-55 degrees0-45 degrees0-55 degrees0-51 degrees0-57 degrees0-56 degrees
Shoe materialAluminium alloySteelMagnesiumSteelAluminiumMagnesium
IncludedC7SB2 Circular Saw, 24-tooth carbide-tipped blade, 10mm wrench, and carrying case.Porter-Cable PC15TCS circular saw and blade.Porter-Cable PC15TCSM saw, carbide tipped thin kerf blade, wrench.SKIL 5280-01 circular saw, carbide blade, wrench, carry bagDEWALT DWE575SB circular saw, blade wrench, carbide-tipped 7-1/4 inch circular saw blade, user instruction manual, contractor bag.Makita 5007MGA 7-1/4-Inch Magnesium Circular Saw, 24T carbide-tipped framing blade, hex blade wrench, rip fence and tool case.
Bevel stops0, 45, and 55 degreesNone0, 22.5, and 45 degrees0 and 45 degrees0, 22.5, and 45 degrees0, 22.5, and 45 degrees
Weight10.1 pounds11.2 pounds9.5 pounds8.7 pounds8.8 pounds10.1 pounds
Cutting depth @ 45 degrees1 27/32 inches1 13/16 inches1 13/16 inches1 15/16 inches1.9 inches1 3/4 inches
Cutting depth @ 90 degrees2 3/8 inches2 3/8 inches2 3/8 inches2 7/16 inches2.55 inches2.5 inches
Warranty5 year limited warranty3 year limited warranty3 year limited warranty1 Year Home Use Warranty3 year limited warranty1 year warranty
Power source120V AC120V AC120V AC120V AC120V AC120V AC
RPM (no load)5,800 RPM5,600 RPM5,600 RPM5,300 RPM5,100 RPM5,800 RPM
Depth adjustmentNoNoYesYesYesYes
Check priceCheck priceCheck priceCheck priceCheck priceCheck price

Pin It on Pinterest

Share This