If you’re looking for the best miter saws for DIY or the jobsite, keep reading. We’ve reviewed dozens of miter saws to find you the best.
Best Miter Saws – Top 6
- Best Miter Saws – Top 6
- Miter Saw Reviews
- Miter Saw Buyers Guide
- Best Miter Saws – Top 6 – Details
Miter Saw Reviews
Best Miter Saw – DEWALT DWS780
If you’re looking for the best miter saw for DIY, the DEWALT DWS780 is the saw for you.
It’s 15 amp motor turns a 12 inch blade at 3,800 RPM and it will cut through just about anything with ease – framing lumber, MDF, cherry, walnut and even oak. Despite that, you’ll be surprised by how quiet and vibration free the saw it, but that’s an indication of how well balanced it is.
So it has enough power to do the job but can it use that power? The answer is 100% Yes! The DWS780 has a sliding action that helps extend its maximum cutting depth out to 16 inches, which is 4 inches more than the Makita LS1016L and plenty for even the most ambitious projects.
The DWS780 also beats out the LS1016L when it comes to cutting height, but the difference is pretty minimal – 6 5/8 inches versus 6 3/4 inches.
The DEWALT, like the Makita, has a double bevel. But the Dewalt just slightly wins out with a better bevel angle of 0 to 48 degrees. The Makita does beat the DWS780 when it comes to miter angles but the DEWALT still boasts an impressive -50 to 50 degrees.
Regardless of what angle you are cutting at, you’ll be impressed by the smoothness of the action and the saw’s ability to hold it. After all, if you can’t set a consistent angle and hold it while you cut, you will be disappointed with the results. The DWS780 makes this part a breeze.
To further help with angled cuts, the DWS780 features clear marks for all angles and bevels, with positive stops for the commonly used angles of 0, 22.5, 33.9, 45, and 49. These make it quick and easy to set up even the most complex cuts.
The DWS780 uses the XPS system instead of a laser. This uses LED light to cast a thin shadow on your workpiece. This has two effects. First, it lights the area so you can see what you are doing. Second, it makes an accurate mark that needs no calibration using the shadow of the blade to create a line. Overall, this is a excellent solution that works better than the traditional laser.
DEWALT make an excellent stand as an optional extra – the DEWALT DWX723 heavy duty miter saw stand. The folding legs and sturdiness of the stand makes it a great choice when working away from the shop. You might also appreciate the stand given that the DWS780 weighs in at 56 pounds, which is the heaviest saw we reviewed (by 4.7 pounds).
As you would expect from DEWALT, the quality of construction and finish is excellent. And that’s probably why DEWALT have no problem backing the DWS780. It comes with a 3 year limited warranty, a 1 year free service contract, and a 90 day money back guarantee. Now compare that to the 1 year warranty of the Makita!
This is an exceptional saw, especially when compared to what’s available in retail stores for the same price. And if you’re serious about home improvement, then you can’t’ go wrong with the DWS780 and it’s XPS system.
Who should buy this miter saw? If you’re serious about DIY and need the best miter saw, the DWS780 is the one you want.
Check price on Amazon
Best Miter Saw For The Money – DEWALT DW715
If you’re looking for the best miter saw for the money, the DEWALT DW715 is the saw for you.
It comes with a 12 inch blade – that’s the largest for a mid-range miter saw. This is going to let you cut wider pieces of wood even though it doesn’t have a sliding action.
The motor is powerful at 15 amps and can spin the blade at 4,000 RPM. This is less than some competitors but the motor combined with the large blade makes for a saw that can handle most tasks.
The saw cuts accurately, which you would probably expect given DEWALTs legendary build quality but is still nice to see. The miter adjustments are rock solid. The quick detents have no wiggle room at all, and the detent override makes it easy for you to adjust to any angle. The simple push-down miter lock is easy to use, and once locked you won’t be able to force it slip to either side.
The dust bag works pretty well – it catches about half of the dust that the saw throws out. If that’s a problem for you, hooking up a shop vac is pretty easy once you get a port adapter.
The DEWALTs miter angle is better than average at 50 degrees. When you combine this with the bevel angles of -3 to 48 degrees, you can be confident that this is a very flexible saw.
The saw is about average when it comes to weight at 42 pounds, but moving it is fairly easy given the handle on the top of it. As far as mounting the saw goes, it works well on a bench. You can also mount it on the DEWALT DWX725B Heavy Duty Work Stand, which folds flat if you need to move it when working on projects.
DEWALT is known for making excellent quality products (and makes them in the US too!). For this reason, they have no problems backing their products with great warranties. The DW715 comes with a 3 year limited warranty, a 1 year free service contract, and a 90 day money back guarantee. Not that it matters because with DEWALTs awesome quality, you’ll probably never need it.
If you need a powerful, flexible miter saw that can handle most tasks a DIYer throws at it, the DEWALT DW715 is the saw for you.
Update: we loved this saw so much that we included it in our guide to the 50 best gifts for DIY fans.
Who should buy this miter saw? If you want the most bang for your buck, the DW715 is the best miter saw for the money.
Check price on Amazon
Best Budget Miter Saw – Hitachi C10FCE2
The C10FCE2 is a 10 inch miter saw from Hitachi that’s very popular with DIYers on a budget.
The saw comes with a 15 amp motor, which spins the blade at 5,000 RPM. This motor can handle most framing materials, hardwoods, and lumber with ease. You can even cut the width of a 2×6 in one pass.
The power of the C10FCE2 is tempered by the soft start mechanism. So instead of getting a burst of power when you pull the trigger, you get a nice slow ramp up. This is a nice safety feature which can prevent the saw from jerking out of your hand.
Speaking of the stock blade, the C10FCE2 comes with a 24 tooth blade is surprising good for general use. It may not be great for cutting hardwoods but for framing lumber and MDF it works great. (If you want to cut hard woods and plywood, you’ll want to get a blade with a higher tooth count).
The miter angle was one of the largest of the saws that we reviewed, which is going to help you make more cuts with less fuss. The miter stops are pretty good and give you positive feedback so you can confident that the stop really is locked in place. And locking down for overriding the miter stops is easy too.
The bevel angle isn’t the best at it’s maximum of 45 degrees, but honestly this saw isn’t designed for really complex tasks. It’s a basic saw that completes basic tasks really well.
The saw is one of the lightest we reviewed at 35.9 pounds so you should have no problem moving it around. That’s a big plus if you’re a contractor hauling it from jobsite to jobsite. And if you aren’t in the shop and get tired of using the saw on your truck bed, Hitachi sell the UU240F heavy-duty portable stand for the saw as an optional extra.
The C10FCE2 comes with a lot of extras – a laser, a material clamp and extension bars. This makes the saw a great deal, especially when you consider that some more expensive saws don’t come with these.
Hitachi also really backs up this saw in the form of a 30 Day satisfaction guarantee and 5 Year warranty. Only DEWALT comes close to a warranty this long and theirs is only 3 years.
Overall, the Hitachi C10FCE2 is a very capable miter saw considering its budget price.
Who should buy this miter saw? Buy this saw if you need the best budget miter saw on the market today.
Check price on Amazon
Best Miter Saw Runner-Up – Makita LS1016L
The Makita LS1016L is one of the best miter saws that money can buy. It isn’t cheap but if you want a high-end saw, you have to pay for it.
Like the other saws we reviewed, it has a 15 amp motor. Makita’s will spin the 10 inch blade at 3,200 RPM with enough power to make it through even hardwoods. The motor is quiet and it’s soft start capability is a nice safety feature that will help keep you safe.
As you would expect from a high-end saw, the LS1016L has a sliding action which allows you to cut wider pieces. In the case of the Makita, you’ll be able to make cuts up to 12 inches deep. That’s less than the DWS780’s 16 inches but is still very respectable.
The LS1016L can also cut tall pieces at 6 5/8 inches. But again this is just beaten out by the DWS780, which can cut pieces up to 6 3/4 inches tall.
The Makita may not have the cutting depth of the DWS780 but it’s miter angle is better at -52 degrees to 60 degrees .
The accuracy of the LS1016L is hard to beat and it gets even better given it’s excellent cutting features. These include a laser and a double bevel, which makes cutting crown molding a snap.
The Makita is lighter than the DWS780 by 4.7 pounds so if portability is key for you, this could make it the winner. If you need a stand, the Makita WST05 miter saw stand is excellent.
With a high-end miter saw, it’s often small details that make the difference between winners and runners up. Here the Makita loses ground a little. Dust collection is poor and the manual is barely usable. Throw in the fact that Makita only gives the saw a 1 year warranty versus the DEWALT’s 3 year warranty and the DWS780 has the edge.
However, those are pretty small complaints. So if you need a saw capable of any task a miter saw can handle and value weight or miter angles over anything else, the Makita LS1016L is the saw for you.
Who should buy this miter saw?A DIYer or semi-professional who is looking for a miter saw that can handle just about anything and is on the lighter side.
Check price on Amazon
Best Miter Saw For The Money Runner-Up – Evolution Power Tools RAGE3
The RAGE3 comes with a 15 amp motor that turns it’s 10 inch blade at 2,5000 RPM. That’s slower than the other saws we reviewed but the RAGE3 can cut steel and aluminium so it definitely has plenty of power. In fact, it can cut everything from 11 ga 2 x 2 steel tube to 3/16 1.5 x 2 steel angle without bogging down.
One of the major benefits of the RAGE3 is it’s sliding action, which is smooth and consistent. This allows you to cut deeper items by sliding the saw towards you before it starts cutting. This is reflected in its maximum cutting depth which is 11 inches versus the DW715’s 8 inches. There’s a trade-off though – it’s cutting height is quite small at 3 inches (The DW715 has a cutting height of 6 inches). So you need to decide which is more important for you. A deep cutting depth is nice if you are cutting wider pieces but if you need to cut taller pieces like crown molding, the RAGE3 will struggle.
One downside of the RAGE3 is dust collection. In fact, it doesn’t even have a dust collection port, let alone a dust bag. So if keeping your workspace neat and tidy is important to you, this might not be the saw you want.
The RAGE3 comes with a laser that will help you make accurate cuts. And the impressive miter angles mean that you should be able to tackle most projects.
The saw weighs in at 39 pounds, which is 3 pounds lighter that the DEWALT DW715. However, it doesn’t include a carrying handle like the DEWALT so they are both about the same when it comes to ease of moving them around.
The RAGE3 includes an important safety feature – the slow start. This gradually ramps up the speed of the blade so that it doesn’t jump out of you hand when you first pull the trigger.
Evolution give the saw a 3 year limited warranty, which is what you would expect from a mid-range saw. But Evolution’s backing of the saw isn’t quite as comprehensive as DEWALTs.
Who should buy this miter saw? If you’re looking for a mid-range miter saw that can cut steel and aluminium as well as wood, the RAGE3 is for you.
Check price on Amazon
Best Budget Saw Runner-Up – Homecraft H26-260L
Like the Hitachi C10FCE2, the Homecraft H26-260L has a 10 inch blade. However, it has a slightly less powerful motor at 14 amps. This means the saw has to turn faster to cut the same wood, which is why it’s max RPM is 5,500 versus 5,000 for the Hitachi.
The saw cuts accurately and when you combine this with generous miter and bevel angles, you end up with a very flexible saw. The capabilities of the saw are enhanced further by the built-in laser, a feature that few other saws in it’s class have.
The fence works well for smaller size lumber. But it’s not high enough to cut larger crown molding pieces. (If you need to cuts pieces like that, you can easily make a jig using two boards and bolt it to the saw.)
The Homecraft H26-260L comes with an electronic brake. This helps to stop the blade quickly once you let go of the trigger, which is a nice safety feature as a spinning blade is a dangerous blade.
The dust bag isn’t very effective but honestly unless you are paying for a high-end miter saw, you probably shouldn’t expect anything else. If this is a concern for you, an easy fix can be to connect a shop vac directly to the dust port. That way the dust gets sucked into the vac as soon as the saw creates it.
The saw itself is easy to assemble and light enough that it’s easy to move around. Homecraft don’t make a stand for this saw but you easily attach it to a portable workbench like the Black & Decker WM125.
The Homecraft H26-260L is a great value miter saw that works well for small simple jobs. It’s just slightly edged out by the longer warranty and slight power increase of the Hitachi C10FCE2.
Who should buy this miter saw? If you want a simple miter saw, at a bargain price, this is the saw for you.
Check price on Amazon
If you’re looking for the best miter saw, the DEWALT DWS780 is the saw for you.
The DEWALT DW715 is a great choice if you’re looking for the best miter saw for the money.
And the Hitachi C10FCE2 is you’re best bet if you need the best budget miter saw.
Miter Saw Buyers Guide
There are 5 things to look for when buying a miter saw.
- Amps – this tells you how much power the miter saw motor has. More power means more cutting power.
- Blade size – the most common blade sizes for miter saws are 8, 10 and 12 inches. This can be important because larger diameter blades are able to make longer cuts.
- Sliding – saws with a sliding action let you cut wider pieces of wood.
- Dust collection/extraction – cutting wood can create a lot of dust. Being able to clean up the dust easily can be a big deal especially if you’re working in a confined space.
- Laser or guide light – these will project a beam or cast a shadow onto your work piece. This helps you accurately guide your cuts.
Best Miter Saws – Top 6 – Details
|Hitachi C10FCE2||Homecraft H26-260L||DEWALT DW715||Evolution Power Tools RAGE3||Makita LS1016L||DEWALT DWS780|
|Blade size||10 inches||10 inches||12 inches||10 inches||10 inches||12 inches|
|Laser or guide light||No||Yes||No||Laser||Laser||LED|
|Editors pick||Best budget saw||Best mid-range saw||Best high-end saw|
|Miter angle range||0 - 52 degrees||-45 - 45 degrees||0 - 50 degrees||-45 - 45 degrees||-52 degrees to 60 degrees||-50 to 50 degrees|
|Bevel angle range||0 - 45 degrees||0 - 47 degrees||-3 - 48 degrees||0 - 45 degrees||0 - 45 degrees||0 to 48 degrees|
|Single or double bevel||Single||Single||Single||Single||Double||Double|
|Weight||35.9 pounds||31 pounds||42 pounds||39 pounds||53.3 pounds||56 pounds|
|Includes||10" 24T TCT Saw Blade (311128), Pivoting Flip Fence (326704), Dust Bag (322955), Vise Assembly (322952), 10mm Box Wrench (940543), 4mm Hex Bar Wrench (944458), Material Support Extension (321549)||Blade, dust bag, and blade wrench.||Carbide blade, dust bag, and blade wrench.||Blade, hex key||10'' x 5/8'' 60T TCT saw blade, vertical vise, dust bag, triangular rule, socket wrench and hex wrench.||Carbide blade, blade wrench, dust bag, and a vertical material clamp.|
|Warranty||30 Day Satisfaction Guarantee and 5 Year Warranty||3 year warranty||3 year limited warranty, a 1 year free service contract, and a 90 day money back guarantee||3 year limited warranty||1 year warranty||3 year limited warranty, a 1 year free service contract, and a 90 day money back guarantee|
|Maximum cutting height||2 5/16 inches||3 1/2 inches||6 inches||3 inches||6 5/8 inches||6 3/4 inches|
|Maximum cutting depth||5 21/32 inches||5 1/2 inches||8 inches||11 inches||12 inches||16 inches|
|Dimensions||23 x 19.1 x 16.1 inches||21 x 13 x 13 inches||27.7 x 20 x 18.8 inches||20 x 31 x 24 inches||21.25 x 31.5 x 20.25 inches||23.75 x 33 x 18.8 inches|
|Manufacturer stand available||Yes||No||Yes||Yes||Yes||Yes|
|Buy Now||Buy Now||Buy Now||Buy Now||Buy Now||Buy Now|