The best circular saw blades help you get the best out of your circular saw. In fact, a good blade can turn an average saw into a good saw. And turn a good saw into a great saw.
So choosing the best circular saw blade is essential. Keep reading to find the best blade for you 🙂
Disclaimer: We Love Power Tools is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
Best Circular Saw Blades – Top 5
|DEWALT DW9196||Diablo D0760X||SKIL 79510C||SKIL 75312||Diablo D0724X|
|Type||Finishing blade||Ultra finishing |
|Masonry blade||Crosscutting and |
|Teeth||40||60||Diamond tipped rim||18 and 40||24|
|Blade size||6.5 inches||7.25 inches||7.0 inches||7.25 inches||7.25 inches|
|Weight||7.2 ounces||6.4 ounces||14.2 ounces||10.2 ounces||4.8 ounces|
|Material||Tungsten carbide||Carbide||Diamond tipped||Tungsten carbide||Carbide|
|Warranty||30 day money |
|Limited lifetime warranty||Unknown||Unknown||Limited lifetime
|Read more||Read more||Read more||Read more||Read more|
|Check price on Amazon||Check price on Amazon||Check price on Amazon||Check price on Amazon||Check price on Amazon|
DEWALT DW9196 finishing blade
A finishing blade is used to make precision cuts without damaging delicate materials.
And that’s exactly what the DW9196 was built to do. In fact, it’s one of the few blades that Pergo recommend for cutting their laminate flooring (which is notorious for chipping when being cut).
The DW9196 is a 6.5 inch blade with 40 teeth. And it weighs about 7.2 ounces, which is about average for a circular saw blade.
The blade is made from tungsten carbide, which is a type of steel that’s very hard. How hard the teeth are is important because hard teeth are part of the formula for getting precision cuts.
Another part of the formula is making sure that the blade doesn’t stick. The Dewalt DW9196 does this by utilizing a non-stick coating on the teeth, which helps it glide past the material it’s cutting instead of getting bogged down.
The anti-kickback design of it’s teeth also make sure that the blade stays where it’s supposed to be instead of jumping all over the place.
All of this results in a blade that can cut wood with no problems. Owners have said the blade has no problems cutting pine, MDF, wet lumber and even oak!
Dewalt is well known for standing behind it’s products and the DW9196 is no different. It’s comes with a 30 day money back guarantee. So if you’re unhappy with the blade for any reason, you can send it back and Dewalt will make things right.
If you want the best circular saw blade for finishing work, check out the Dewalt DW9196.
Diablo D0760X ultra finishing blade
The Dewalt DW9196 is a great finishing blade and will be awesome for most finishing projects.
But let’s say you’re a trim carpenter or you need to cut very delicate materials like melamine, veneer pine or delicate molding.
If that’s the case, you need an ultra-finishing blade like the Diablo D0760X.
It has 60 teeth, 20 more than the DW9196, which is perfect for making fine cuts without chipping delicate materials.
The blade is made from steel and the teeth are coated with Diablo’s TiCo Hi-Density Carbide formula. That’s a recipe for slicing through delicate materials without damaging them.
In fact, owners of the blade have found that they can cut plywood without ripping the veneer and can cut laminate with no chipping or splintering.
And you can expect to make super straight cuts with little blowout on the bottom side and next to no pull 🙂
Combine this with a limited lifetime warranty and you have the best circular saw blade for ultra finishing work.
SKIL 79510C masonry blade
When most people think about using a circular saw, they picture cutting wood.
But circular saws can be used for cutting harder materials like concrete and brick.
To do that, you’re going to need a blade like the SKIL 79510C.
The 79510C is diamond tipped, which makes it perfect cutting hard materials. In fact, owners of the blade have used this blade to cut granite! (Just go slow and use water to keep the dust down).
It’s also perfect for cutting concrete, whether it’s a concrete floor or concrete paving stones for your patio. (Again using water can keep the dust down but using a shop vac is another good choice).
If your next project includes cutting masonry, the 79510C is the best circular saw blade for you 🙂
SKIL 75312 crosscutting and ripping blades
Ripping is cutting along the grain of the wood; while crosscutting is cutting across the grain.
Cutting along the grain is a easy cut. Essentially, you rip the wood apart, the same way you would with an axe. The difference is that with a saw you’ll get a straighter cut 🙂
While ripping is usually easier than cross-cutting, it has a tendency to bind the blade as the wood fibers relax. So it’s important to use a blade specifically designed for ripping.
Crosscutting across the grain is much harder for the saw because you need to cut a lot of fibers. So you’ll need a blade with more teeth to help cut through all those fibers.
Image comes from http://www.rockler.com/how-to/blades-101/
The Skil 75312 ripping blade has 18 teeth, with wide gullets. That’s perfect for powering through a rip cut without the blade bogging down.
The Skil 75312 crosscutting blade has 40 teeth, which is just the right amount for slicing through all the extra fibers involved with a crosscut.
The teeth on both blades are made from tungsten carbide, which is significantly harder than steel. That results in blade teeth that can slice through wood like a hot knife through warm butter…
If you’re going to be ripping and crosscutting, these are the best circular saw blades for you.
Diablo D0724X framing blade
One of the most common uses for a circular saw is cutting lumber when framing out a room or structure.
The key to a good framing blade is being able to cut accurately and quickly. And the Diablo D0724X helps you do just that.
The D0724X has 24 teeth designed to slice through rough framing lumber, high-quality finish lumber, plywood and even OSB (oriented strand board).
The teeth are coated with TiCo Hi-Density Carbide. That helps to keep the teeth sharp for up to four times longer than regular carbide, which makes the blade a great deal.
This blade also has a reputation for cutting without burning, scorching or smoking, which isn’t something that you can say about every framing blade…
If you need to do some framing, you can’t go wrong with the D0724X.
Check price on Amazon
A good blade is one of the easiest ways to get the best out of your circular saw. Pick on from this list and your DIY projects should get easier 🙂
Oh and if you find that you need a new circular saw instead of a new blade, check out our review of the best circular saws.